• Reduced price
  • New

copy of SLIMTANK RAINWATER COLLECTION SYSTEM

PLN3,623.58 8%
PLN3,333.69 tax incl
PLN2,710.32 tax excl
ZWET0001
Pojemność:
Product available for orders
Ask about product?
  • A complete flat rainwater tank with a pump and filter
  • capacity 2000l
  • ground cover up to 1 meter

SLIMTANK 2000L RAIN COLLECTION SYSTEM

A complete flat rainwater tank with a pump and a filter for rainwater management

A description of the action

Rainwater is collected by the gutter system from the roof surface and directed through the downspouts to the 2000l Slimtank. A GAP X80 pump was used to distribute the water. Connecting the garden hose to the collection box allows the use of rainwater accumulated in the underground tank for the purposes of e.g. watering the garden.

Delivery range:

2000 l Slimtank

is a new generation flat rainwater tank, ready to be installed with the superstructure and cover. It has three inlet DN110 and one outlet DN110.

  • Easy assembly!
  • The low structure of the reservoir enables the foundation of the reservoir at high groundwater levels.
  • It is perfect for narrow spaces.
  • Possibility of foundation in clay and silty soils
  • Maximum ground cover up to 1 meter
  • 10-year warranty on the tank

Total capacity

2 m³

Length

2420 mm

Width

1200 mm

Number and diameter of manholes

1 x ø 600

Production technology

Odlewanie rotacyjne

Material

HDPE ρ = 940 kg/m³

Application:

Septic tank, rainwater tank, other

Tank cover and 40 cm riser pipe extension

The tank cover is made of polyethylene - an ideal solution for traffic in green areas. The hatch superstructure - height 400 mm, diameter 600 mm, i.e. the riser tube is 40 cm high and it is possible to order a riser telescope to extend the hatch.

Filter basket with cutout

The filter basket is recommended for roof surfaces max. up to 350 m2. It has the dimensions: Ø 410 mm, height 160 mm. Fine filter (filter mesh size - 0.9 mm). Attachment lines and a hook are attached to the basket.

Garden box for connecting a garden hose

The set includes a ball valve ¾ MZ and a PE elbow ¾ ”MZ screwed from the bottom to the ball valve and 32 mm on the other side of the elbow. Top box diameter - 210 mm, bottom box diameter - 180 mm, box height - 120 mm.

Pump GAP X80

is an automatic submersible pressure pump. It is used for irrigating small green areas. The pump is running in start / stop mode. After opening the receiver (e.g. a tap with garden water), it starts, and after closing it, it goes into standby mode.

Maximum flow rate

83 l/min

Maximum lifting height

20 m

Maximum working pressure

2 bar

Delivery line

3/4'' GZ

Length of the power cord

10 m

Maximum immersion depth of the pump

7 m

Nominal power

0,55 kW

Maximum temperature of pumped water

35° C

Tension

230 V

Frequency

50 Hz

Protection class

IPX8

Rotors

Plastic

Shaft

stainless steel

Housing

Plastic