SKE Kubaton tank for the transport of liquids 100l

PLN479.70 tax incl
PLN390.00 tax excl
SK-100E
Capacity:
Colour:

Volume discounts

Quantity Unit discount You Save
2 5% Up to PLN47.97
Lead time 2-3 days
Ask about the product
  • Capacity from 100 to 500 l
  • Suitable for transporting liquids
  • Monolithic construction

Water transport tank Kubaton SKE

The tanks bear the Polish hygienic certificate of the PZH, which authorises them for contact with drinking water. The original document is available in the download section. Logo PZH

The SKE series are tanks with increased resistance to mechanical damage.
White tanks are available. SKE tanks are characterised by full tightness. This is due to the tighter lid compared to other container series. The SKE therefore proves its worth as a container for transporting liquids. To avoid leakage, the container should be filled to a level 5% below its nominal volume.

Polyethylene containers are designed for the storage and transport of water and other chemicals (chemical resistance table). They are resistant to both low and high ambient temperatures
from -40 to +60 (+/-5)°C. It is recommended to limit exposure to the sun during storage. Heat and UV radiation adversely affect the properties of some substances. The containers do not corrode or fade under UV exposure. The containers are made by rotational moulding, so they have no seams or welds.

The containers are shaped to be easily stackable. They can be transported in any vehicle without exceeding the permitted load capacity. Their strength comes from their reinforced walls (thicker than in normal horizontal tanks) and their shape. The tanks have special stiffeners (ribs), which are used to secure them to the vehicle with straps and act as partial breakwaters. This limits the movement of the liquid during transport. Transport is indeed safer, as the tank does not vibrate uncontrollably.

The presence of condensed water in the tanks is permissible. This is a normal occurrence.

The tank is fitted with a bottom threaded hole of 3/4 inch. The hole is closed in its original state. The standard thread is not designed for a float valve. In order to install the valve, the hole must be drilled anywhere else on its own. You can drill the hole on a flat wall where its position will be optimal. The standard threads are only for the connection of a fitting or tap. The manufacturer's guarantee is still valid if the customer drills his own holes. Please refer to the instructions.
It is also possible to retrofit the tank with a sealed grommet with external threads:

  • plastic in sizes: ½", ¾", 1", 1 ¼", 1 ½ ", 2",
  • brass in sizes: ¾", 1", 1 ½ ", 2".
Please contact us for more information.
Technical data

Tank
Volume [l]
Height [mm]
Length [mm]
Width [mm]
Wall thickness [mm]
Bore diameter [mm]
Thread [inch]
SK-100E
100
438
480
690
3,5
220
¾
SK-301E
300
610
1100
610
4,5
350
SK-400E
400
627
1265
670
4,5
350
SK-500E
500
610
1565
655
5
350

*Dimensions may vary slightly due to the production process. The measurement error is 5-10 % from the nominal values in the table.

Specific References

ean13
5905943321050

DRINKING WATER TANKS - INSTALLATION OF CONNECTIONS

Drinking water tanks are manufactured using rotomoulding technology, which allows the tanks to be produced as a whole, without the need to weld individual components together, which has a beneficial effect on the mechanical strength of the tank. Polyethylene tanks are lighter than their steel or resin counterparts. Tanks made of non-toxic polyethylene are ideal for storing foodstuffs as well as technical substances used in various production processes. The polyethylene material prevents the growth of algae by being impermeable to sunlight. The tank can withstand temperatures from -20 to +80 °C.

The proposed tanks are ideal for:

-storing drinking water or other food-grade liquids both indoors and outdoors,

-the construction of buffer tanks to be used in the event of pressure drops or water shortages,

-to store water for fire-fighting purposes, laundry or dishwashing,

-supplying water in the event of a shortage of water on distribution vehicles,

-collecting and using rainwater, which can be used for irrigation or toilet flushing, etc.

Installation of spigots

The polyethylene tanks have a polypropylene lid equipped with a vent with anti-fungal protection and threaded connections. Additional inlet and outlet openings can be provided on request. Here is how to properly assemble the spigots.

1) Preparation of the hole

The hole for the spigot should be drilled with a hole saw in the centre of a flat surface located at the bottom of the tank, approximately 10 cm above the bottom of the tank. The diameter of the hole should be equal to the diameter of the spigot.
Przygotowanie otworu w zbiorniku.

2) Installing the spigot

Place a gasket on the spigot and then, from the centre of the tank, pass it through the pre-drilled hole. If there are any problems with translation, the spigot can be lightly hammered in with a rubber mallet. Place a second gasket and nut on the spigot protruding from the tank.

Montaż króćca w zbiorniku na wodę pitną

3) Tighten spigot

Tighten the nut all the way, e.g. with a pipe chain spanner. Then clean the tank and the spigot of any shavings that may have occurred during assembly.

Dokręcanie króćca w zbiorniku na wodę pitną

All tanks have the necessary approvals and certificates to allow the tanks to come into contact with foodstuffs.

Oferta na zbiorniki na wodę pitną

Grade
star star star star star
2022-10-12

możesz bezpiecznie przewozić płyn

Bardzo zadowolony z zakupu. Wygląda niezawodnie, dzięki kolorowi możesz szybko określić, ile wody jest w środku. Nie płynie

Capacity Image Unit price
100l
SKE Kubaton tank for the transport of liquids
Discount by quantity
2+
PLN455.72
–5%
300l
SKE Kubaton tank for the transport of liquids
Discount by quantity
2+
PLN722.13
–5%
400l
SKE Kubaton tank for the transport of liquids
Discount by quantity
2+
PLN877.54
–5%
500l
SKE Kubaton tank for the transport of liquids
Discount by quantity
2+
PLN1,087.87
–5%