URZĄDZENIE KONTROLNE SQUEALER-3

SQUEALER-3 CONTROL DEVICE

PLN6,039.30 tax incl
PLN4,910.00 tax excl
SQU-3-GSM
Model czujnika:
Product available for orders
Ask about product?
  • 3-probe detector, S-3-WRL, S-3-WRL-GSM
  • Three probes to choose from: (MAX) overfill, (OILER) fat and petroleum oil level, (SLUDO) sludge level
  • LEDs indicating normal status and fault status

SQUEALER-3 detector

Modern, microprocessor-based device for continuous monitoring of liquid overflow status, oil level, sludge level thanks to the connection of 3 probes (MAX, OILER, SLUDO)

 

The composition of the SQUEALER-3 set

SQUEALER-3 detector equipped with 3 inputs + 3 outputs with probes:
  • - MAX (overfill probe)
  • - OILER (oil, fat, petroleum level probe)
  • - SLUDO (sludge probe)
 

The composition of the SQUEALER-3-WRL set

SQUEALER-3 detector equipped with 3 inputs + 2 outputs with probes:
  • - MAX (overfill probe)
  • - OILER (oil, fat, petroleum level probe)
  • - SLUDO (sludge probe)
  • - GSM (SMS, system status on request, battery status notification)
  • - 3 x Power supply intrinsically safe cable 2 x 1 mm2 for sensors 5 m.b.
  • - 3 x Set for hanging sensors
 

The composition of the SQUEALER-3-WRL-GSM set

The SQUEALER-3 detector is equipped with 3 inputs + 1 output with probes:
  • - MAX (overfill probe)
  • - OILER (oil, fat, petroleum level probe)
  • - SLUDO (sludge probe)
  • - GSM (SMS, system status on request, battery status notification)
  • - Battery powered (up to 2 years battery life) or solar panels
 

Technical data

  • - Power supply: 230V AC
  • - Max. fuse: 1.25 A
  • - Power consumption (nominal): 2.2 VA
  • - Relay outputs REL1, REL2, REL3: Potential-free NO or NC contacts, 2A / 120V AC or 2A / 24V DC
  • - Ambient temperature: -40 to + 60 ° C
  • - Mechanical strength: IK 07
  • - Housing dimensions (without cable glands) (H x W x D): 187 x 122 x 90 mm

Installation of probes

Overflow probe

Hang the probe with a 5 m standard cable on the FIX holder, which should be placed directly under the hatch - preferably in the inspection hole in the separator cover.

 

Petroleum / organic oil level probe

The probe should be placed at the appropriate depth / height and the sensor cable should be wound around the mounting eye (FIX) in such a way that the cable is blocked and the probe does not change its position on the handle during operation.

 

Sludge level probe

The mounting height of the sensor depends on the volume of the device's sedimentary part. The amount of accumulated sludge must not exceed 1/3 ÷ 1/2 of the height between the bottom of the outlet pipe and the bottom of the sludge chamber. When installing the sensor, it should be noted that usually sediment accumulates in the measurement zone at different heights, which depends primarily on the speed of flowing sewage. Where the flow velocity is lowest, it will accumulate the most and vice versa. Hang the probe with a 5 m standard cable on the holder. The handles should be placed directly under the hatch - preferably in the inspection hole in the separator lid.

 

Additional options

  • - Power cable extension possible (2 X 1 mm2 intrinsically safe cable to sensors)
  • - Industrial optical-acoustic siren designed for outdoor installation
  • - Connection socket - used when the cable needs to be extended, the socket is used to connect them hermetically.