back to category

Rainwater tank set Tower Inox

  • -10%

Tower rainwater tank

Capacity
Colour
  • -5%

Tap with external thread ¾ "

Colour
  • -5%

Rainwater collector with Inox mesh filter

Colour
  • -5%

Rainwater collector-tank connection set without...

PLN2,133.23 10%
PLN1,919.90 tax incl
PLN1,560.90 tax excl
Delivery from PLN319.80
On request

Pack description

Tower decorative tank 720l + Inox mesh collector with connection + Brass or chrome tap

Decorative rainwater tank Tower 720 l



The polyethylene Tower tank for collecting rainwater with a capacity of 720 l has a minimalist design. The tank was made in Poland - the manufacturer is Prosperplast. The texture of the tank closely resembles a plaster wall. Thanks to this, it fits perfectly into the surroundings of every home. In addition, the dimensions of the tank enable installation even in limited space in the garden. The tank is narrow, but very high - inspired by the shape of a tower. Tank in the color of granite grit.
At the bottom of the tank there are threaded holes (brass thread) with a diameter of 3/4". The tap is not included in the set. It must be purchased separately - it is available in the offer.


Polyethylene is a high-quality material resistant to weather conditions. Does not fade or corrode. It is resistant to mechanical damage. Rainwater tanks made of polyethylene guarantee long-term durability.

Dimensions of the Tower 720 l rainwater tank:
 

  • Capacity 720 l,

  • Height 1800 mm,

  • Width 590 mm,

  • Length 790 mm,

  • Drain diameter 3/4".

Tap with external thread

Dedicated tap to the decorative tanks for rainwater

Tap with 3/4" male thread - Used for decorative rainwater tanks. Available in two versions, chrome or brass. It is characterised by high durability. The material from which it is made has anti-corrosive properties. As a result, it can serve for a long time without damage. 

Rainwater collector with Inox mesh filter

Collector with Inox mesh filter for rainwater install on rainwater drain pipe

The Filter Collector leads clean water to the rainwater tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled. Filter collector have two positions open or closed. Integrated filter sieve. The mesh is made of stainless steel. Rainwater collector is suitable for the connection of almost all the pipes, circular (diameter 68 mm-100 mm). Collector designed for roof surface max. 70 m2. Available in two different colors brown and gray.

Compared to the previous model, the range of possible gutter diameters has changed. The new model fits gutter diameters from 68 to 100 mm. In the attachments, you will find additional information and installation instructions for the collector.

How it works

1. Rainwater is channelled from the filter entrance to the sieve cartridge.
2. Dirt is rinsed to the sides, and to waste.
3. Cleaned water is led through the cartridge outlet channel to storage.
4. Settings for winter and summer conditions. Twist 180° to remove cartridge filter, no need to demount filter body. The filter cartridge can be cleaned easily with detergent and a brush.

Rainwater collector-tank connection set without removable cover

The set consists of a hose with a coupling to connect the rainwater tank to the rainwater collector for filling the tank. The set is designed for tanks without a removable cover. We also offer a variant of the set with a compatible jigsaw (hole saw).

Dimensions:

  • Diameter: 32 mm
  • Length: 30 cm