Zestaw zbiornik na deszczówkę Tower Stone 500L Inox
Delivery
| Delivery methods | Name | Time of delivery | Price |
|---|---|---|---|
|
Indywidualna wycena dostawy - Spedycja | Proszę potwierdzić zamówienie - koszty dostawy zostaną przesłane mailem jako oddzielna informacja. Proszę o chwilę cierpliwości. | individual valuation |
|
Kurier ( przelew na konto) | Czas dostawy od 2-4 dni | PLN202.95 |
|
Kurier (płatność za pobraniem) | Czas dostawy 1-4 dni roboczych | PLN258.30 |
Delivery time 2-4 days
Tower Stone decorative rainwater tank 500 l
The Tower Stone decorative tank with a capacity of 500 l is characterized by a segmented structure. The tank was manufactured in Poland by a Polish manufacturer - Prosperplast. The texture of the tank imitates shale rock. The rainwater tank is fully functional and aesthetic. Its unique design will successfully fit into any garden. It is also characterized by the fact that it can be used on small plots - it is narrow but high.
The Tower Stone 500 l rainwater tank is available in the following colors: anthracite and gray. In the lower part of the tank there are 3/4" threaded drainage holes. The lowest holes are used to pump out water for the winter. The tank is equipped with a cover at the top. A submersible pump can be used in the tank.
The decorative rainwater tank is made of high-density polyethylene (HDPE). Thanks to this, it is very resistant to unfavorable external conditions. In addition, it does not corrode or fade. This is a guarantee of long-term use without failure.
The tap must be purchased separately because it is not included in the set (available in our offer).
Tower Stone 500 l tank dimensions:
Capacity 500 l,
Height 1300 mm,
Width 583 mm,
Length 775 mm.
Tap with external thread
Dedicated tap to the decorative tanks for rainwater
Tap with 3/4" male thread - Used for decorative rainwater tanks. Available in two versions, chrome or brass. It is characterised by high durability. The material from which it is made has anti-corrosive properties. As a result, it can serve for a long time without damage.
Rainwater collector with Inox mesh filter
Collector with Inox mesh filter for rainwater install on rainwater drain pipe
The Filter Collector leads clean water to the rainwater tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled. Filter collector have two positions open or closed. Integrated filter sieve. The mesh is made of stainless steel. Rainwater collector is suitable for the connection of almost all the pipes, circular (diameter 68 mm-100 mm). Collector designed for roof surface max. 70 m2. Available in two different colors brown and gray.
Compared to the previous model, the range of possible gutter diameters has changed. The new model fits gutter diameters from 68 to 100 mm. In the attachments, you will find additional information and installation instructions for the collector.
How it works
1. Rainwater is channelled from the filter entrance to the sieve cartridge.
2. Dirt is rinsed to the sides, and to waste.
3. Cleaned water is led through the cartridge outlet channel to storage.
4. Settings for winter and summer conditions. Twist 180° to remove cartridge filter, no need to demount filter body. The filter cartridge can be cleaned easily with detergent and a brush.
Connection set
The connection tank with rainwater collector
It allows connect tank with the collector of rainwater. 25 cm hose length. Available in two different diameters of 25 mm and 32 mm. 32 mm diameter hose fits most collectors of rainwater. The combination of 25mm fits to the leaves separator with the function of filling, available on request. When ordering, please let us information about a diameter hose.
We recommend that you also take a look at our other offers, such as the Jigsaw Connection Kit.
We recommend that you also take a look at our other offers, such as the Jigsaw Connection Kit.
