• -7.06%
Kubaton 500 GE liquid transfer tank
back to category

Tank for transporting liquids Transport GE 1000l

PLN1,359.15 7.06%
PLN1,263.21 tax incl
PLN1,027.00 tax excl

Lowest price in the period of 30 days before current promotion: PLN1,359.15 -7%

G-1000E
Capacity:
Colour:

Volume discounts

Quantity Unit discount You Save
2 5% Up to PLN126.32
Delivery from PLN227.55
On request
Ask about the product
  • Capacity 500-2000 l
  • Low centre of gravity and leak-proof lid
  • Monolithic construction

 

Download PDF

Water transport tank Transport GE

The tanks bear the Polish hygienic certificate of the PZH, which authorises them for contact with drinking water. The original document is available in the download section. Logo PZH

GE polyethylene tanks are designed for the storage and transport of water and other chemicals (chemical resistance table). They are resistant to both low and high ambient temperatures of -40 to +60 (+/-5)°C. It is recommended to limit exposure to the sun during storage. Heat and UV radiation adversely affect the properties of some substances. The containers do not corrode or fade under UV exposure. The containers are made using the rotomoulding method, so they have no seams or welds.

 The GE series are tanks with increased resistance to mechanical damage - ribbed construction. Their strength also comes from their reinforced walls (thicker than normal horizontal tanks) and shape. GE transport tanks are available in white. The colour is semi-transparent, making it easy to see the filling level. The 1,000 litre and 2,000 litre tank additionally has an integrated dipstick, which makes it easy to verify filling without having to open the lid.

GE tanks are characterised by an increased airtightness, but are not fully airtight. This is due to the tighter lid compared to other container series. The lid has a vent to prevent over-pressurisation. The container works well for transporting liquids. The GE container has a low centre of gravity, which makes transportation significantly safer. Therefore, they will prove themselves as a container for transporting liquids.

CAUTION!!!

To avoid fluid leakage, the actual filling volume of the container should be min. 5 % less than its nominal volume. The lid must always be at the top of the container. Otherwise it is obvious that leakage is bound to occur.

The presence of condensed water in the tanks is acceptable. This is a normal occurrence. We encourage you to read the manual, which contains all the recommendations for the use of UHPlast tanks.

Tank connection Transport GE

Threaded connection on individual customer request.

For the installation of the float valve, a hole must be drilled at any other location on your own. You can drill the hole on a flat wall where its position will be optimal. The standard threads are only for the connection of a fitting or tap. The manufacturer's guarantee is still valid if the customer drills his own holes. Please refer to the instructions.

It is also possible to retrofit the tank with a sealed grommet with external threads:

  • plastic in sizes: ½", ¾", 1", 1 ¼", 1 ½ ", 2",
  • brass in sizes: ¾", 1", 1 ½ ", 2".
Please contact us for more information.
Technical data

Tank
Volume [l]
Height [mm]
Length [mm]
Width [mm]
Wall thickness [mm]
Bore diameter [mm]
Connection thread [inch]
G-500E
500
733
1320
812
4,0
350
-
G-1000E
1000
920
1500
1160
6,5
410
¾
G-2000E
2000
1130
2000
1220
7,0
-

*Dimensions may vary slightly due to the production process. The measurement error is 5-10 % from the nominal values in the table.
Actual tank capacity may differ by 4% from nominal.

Specific References

ean13
5905943321623

DRINKING WATER TANKS - INSTALLATION OF CONNECTIONS

Drinking water tanks are manufactured using rotomoulding technology, which allows the tanks to be produced as a whole, without the need to weld individual components together, which has a beneficial effect on the mechanical strength of the tank. Polyethylene tanks are lighter than their steel or resin counterparts. Tanks made of non-toxic polyethylene are ideal for storing foodstuffs as well as technical substances used in various production processes. The polyethylene material prevents the growth of algae by being impermeable to sunlight. The tank can withstand temperatures from -20 to +80 °C.

The proposed tanks are ideal for:

-storing drinking water or other food-grade liquids both indoors and outdoors,

-the construction of buffer tanks to be used in the event of pressure drops or water shortages,

-to store water for fire-fighting purposes, laundry or dishwashing,

-supplying water in the event of a shortage of water on distribution vehicles,

-collecting and using rainwater, which can be used for irrigation or toilet flushing, etc.

Installation of spigots

The polyethylene tanks have a polypropylene lid equipped with a vent with anti-fungal protection and threaded connections. Additional inlet and outlet openings can be provided on request. Here is how to properly assemble the spigots.

1) Preparation of the hole

The hole for the spigot should be drilled with a hole saw in the centre of a flat surface located at the bottom of the tank, approximately 10 cm above the bottom of the tank. The diameter of the hole should be equal to the diameter of the spigot.
Przygotowanie otworu w zbiorniku.

2) Installing the spigot

Place a gasket on the spigot and then, from the centre of the tank, pass it through the pre-drilled hole. If there are any problems with translation, the spigot can be lightly hammered in with a rubber mallet. Place a second gasket and nut on the spigot protruding from the tank.

Montaż króćca w zbiorniku na wodę pitną

3) Tighten spigot

Tighten the nut all the way, e.g. with a pipe chain spanner. Then clean the tank and the spigot of any shavings that may have occurred during assembly.

Dokręcanie króćca w zbiorniku na wodę pitną

All tanks have the necessary approvals and certificates to allow the tanks to come into contact with foodstuffs.

Oferta na zbiorniki na wodę pitną

Nazwa Capacity Image Unit price

Tank for transporting liquids Transport GE

 500l
Tank for transporting liquids Transport GE
PLN1,087.32 Brutto
PLN884.00 Netto
Discount by quantity
2+
PLN1,032.95
–5%

Tank for transporting liquids Transport GE

 1000l
Tank for transporting liquids Transport GE
PLN1,359.15 – 7.1%
PLN1,263.21 Brutto
PLN1,027.00 Netto
Discount by quantity
2+
PLN1,263.21
–7.1%

Tank for transporting liquids Transport GE

 2000l
Tank for transporting liquids Transport GE
PLN2,959.38 Brutto
PLN2,406.00 Netto
Discount by quantity
2+
PLN2,811.41
–5%

You might also need

3/4 " faucet for water tanks

3/4 " faucet for water tanks

  • Plastic faucet
  • Diameter 3/4"
  • For UHPlast water tanks
star_border star_border star_border star_border star_border
0 Review(s) 
Price
PLN49.99
PLN40.64 tax excl
Brass faucet 3/4" UHP
  • New

Brass faucet 3/4" UHP

  • External thread 3/4"
  • Made of brass
  • Approved by the National Institute of Hygiene
star_border star_border star_border star_border star_border
0 Review(s) 
Price
PLN76.26
PLN62.00 tax excl