Verticale Vertigo granite drinking water tank
  • Tank verticale granite
  • Tank verticale granite
  • Tank verticale granite

Drinking water tank Verticale

PLN482.36 tax incl
PLN392.16 tax excl
ROVE0005M
Capacity:
Colour:
In order
Ask about the product
  • Tank for liquid foodstuffs - drinking water with PZH certificate or for rainwater
  • Volume from 50 to 10000L
  • Available colors: granite, blue, gray, green, terracotta

Verticale tank

Drinking water tanks, rainwater tanks, above ground tanks, tanks for foodstuffs, chemical substances, e.g. for glycol
 

Verticale tanks are made from low-density polyethylene (LLDPE) by rotational moulding. Rotational moulding is a process of manufacturing tanks from a single piece, free of welds that could weaken the structure of the tank. It does not cause internal stresses. Polyethylene is completely non-toxic and does not encourage the growth of algae, making the tanks ideal for storing drinking water and other food liquids. The tanks are resistant to temperature changes (from -20°C to +60°C) and to atmospheric, chemical and physical conditions. The tanks are not subject to corrosion or oxidation processes, which is excellent for their tightness. The tanks are lightweight, easy to transport and their installation is very simple and economical. Verticale tanks are non-pressurised tanks. To regulate the inflow of water, a flow regulator must be used.

  • An optional spigot hole can be prepared.
  • Tanks are approved by the Polish National Institute of Hygiene.
The tanks are available in 5 colours:

  • granite (standard)
  • blue RAL 5015
  • grey RAL 7037
  • green RAL 6005
  • terracotta RAL 8004
We have a wide offer of drinking water tanks, Cisterna water tanks or Panettone water tanks are some of the many models. We recommend taking a look at our product range!

Technical data

Product code 
Capacity [l]
Diameter [cm]
Heighty [cm]
Revision Ø [cm]
Inlet
Outlet
Drainage hole
Mass [kg]
 ROVE0005
50
43
43
21
-
-
¾”
3
 ROVE0015 
150
60
70
21
¾”
-
¾”
6
ROVE0030
300
63
110
21
¾”
-
¾”
10
ROVE0050
500
68
152
30
¾”
1”
¾”
15
ROVE0100
1 000
85
193
30
1”
1”
¾”
25
ROVE0200
2 000
115
210
40
1”
1”
¾”
33
ROVE0300
3 000
135
230
40
1”
1/2
1”
40
ROVE0500
5 050
180
223
40
1”
1/2
1”
60
ROVE9999
10 000
246
260
60
-
-
-
200

Tolerance: +/-3% on dimensions; 5% on volume

DRINKING WATER TANKS - INSTALLATION OF CONNECTIONS

Drinking water tanks are manufactured using rotomoulding technology, which allows the tanks to be produced as a whole, without the need to weld individual components together, which has a beneficial effect on the mechanical strength of the tank. Polyethylene tanks are lighter than their steel or resin counterparts. Tanks made of non-toxic polyethylene are ideal for storing foodstuffs as well as technical substances used in various production processes. The polyethylene material prevents the growth of algae by being impermeable to sunlight. The tank can withstand temperatures from -20 to +80 °C.

The proposed tanks are ideal for:

-storing drinking water or other food-grade liquids both indoors and outdoors,

-the construction of buffer tanks to be used in the event of pressure drops or water shortages,

-to store water for fire-fighting purposes, laundry or dishwashing,

-supplying water in the event of a shortage of water on distribution vehicles,

-collecting and using rainwater, which can be used for irrigation or toilet flushing, etc.

Installation of spigots

The polyethylene tanks have a polypropylene lid equipped with a vent with anti-fungal protection and threaded connections. Additional inlet and outlet openings can be provided on request. Here is how to properly assemble the spigots.

1) Preparation of the hole

The hole for the spigot should be drilled with a hole saw in the centre of a flat surface located at the bottom of the tank, approximately 10 cm above the bottom of the tank. The diameter of the hole should be equal to the diameter of the spigot.
Przygotowanie otworu w zbiorniku.

2) Installing the spigot

Place a gasket on the spigot and then, from the centre of the tank, pass it through the pre-drilled hole. If there are any problems with translation, the spigot can be lightly hammered in with a rubber mallet. Place a second gasket and nut on the spigot protruding from the tank.

Montaż króćca w zbiorniku na wodę pitną

3) Tighten spigot

Tighten the nut all the way, e.g. with a pipe chain spanner. Then clean the tank and the spigot of any shavings that may have occurred during assembly.

Dokręcanie króćca w zbiorniku na wodę pitną

All tanks have the necessary approvals and certificates to allow the tanks to come into contact with foodstuffs.

Oferta na zbiorniki na wodę pitną

Grade
star star star star star
2024-05-10

Pasuje mi

Nowoczesny wygląd i wysoka jakość produktu.

Grade
star star star star star
2022-07-01

Do ogrodu

Kupiłam rok temu z mężem ten zbiornik do ogrodu na deszczówkę. Super się sprawdza, kolor nie blaknie.

Grade
star star star star star
2022-07-01

Zbiornik

Kompaktowy, idealny do pomieszczenia.