300l and 470l GRANIT DRINKING WATER TANK CUBO

Cubo drinking water tank 300l

PLN1,125.70 tax incl
PLN915.20 tax excl
ROQ300M
Capacity:
Colour:
On order by 7-21 days
Ask about the product
  • PZH drinking water or rainwater tanks
  • Capacity: 300l, 500l
  • Colours: granite, blue, grey, green, terracotta.

Cubo aboveground tanks

Above ground tanks for the storage of foodstuffs - drinking water, rainwater and chemicals such as glycol

Cubo tanks are made from high-density polyethylene (LLDPE) by rotational moulding. Rotational moulding is a process of manufacturing tanks from a single piece. They are free of welds that could weaken the tank components and do not cause internal stresses. The polyethylene from which the tanks are made is completely non-toxic and does not encourage the growth of algae, making the tanks ideal for storing drinking water and other food liquids. The tanks are resistant to temperature changes (from -20°C to +60°C) and to atmospheric, chemical and physical agents. They are not subject to corrosion or oxidation processes, which is excellent for their tightness. They are lightweight, easy to transport and their installation is very simple and economical. Cubo tanks are non-pressurised tanks. To regulate the inflow of water, a flow regulator must be used.

  • An optional spigot hole is available.
  • Tanks are approved by the Polish National Institute of Hygiene (PZH).
The tanks are available in 5 colours:

  • granite basic model
  • blue RAL 5015
  • grey RAL 7037
  • green RAL 6005
  • terracotta RAL 8004
In our offer of aboveground drinking water tanks we also have other models such as: Sottotetto 300 l tank, Jolly tanks or KiTank tanks

Technical data

Product code
Capacity [l]
Lenght [mm]
Width [mm]
Height [mm]
Cover diameter [mm]
Inlet
Outlet
Drainage pipe
QS 300
300
760 
 760
 680
 300
¾``
1``
¾``
QS 500
470
760
 760
 980
 300
 ¾``
1``
 ¾``

Tolerance: +/-3% on dimensions; 5% on volume

DRINKING WATER TANKS - INSTALLATION OF CONNECTIONS

Drinking water tanks are manufactured using rotomoulding technology, which allows the tanks to be produced as a whole, without the need to weld individual components together, which has a beneficial effect on the mechanical strength of the tank. Polyethylene tanks are lighter than their steel or resin counterparts. Tanks made of non-toxic polyethylene are ideal for storing foodstuffs as well as technical substances used in various production processes. The polyethylene material prevents the growth of algae by being impermeable to sunlight. The tank can withstand temperatures from -20 to +80 °C.

The proposed tanks are ideal for:

-storing drinking water or other food-grade liquids both indoors and outdoors,

-the construction of buffer tanks to be used in the event of pressure drops or water shortages,

-to store water for fire-fighting purposes, laundry or dishwashing,

-supplying water in the event of a shortage of water on distribution vehicles,

-collecting and using rainwater, which can be used for irrigation or toilet flushing, etc.

Installation of spigots

The polyethylene tanks have a polypropylene lid equipped with a vent with anti-fungal protection and threaded connections. Additional inlet and outlet openings can be provided on request. Here is how to properly assemble the spigots.

1) Preparation of the hole

The hole for the spigot should be drilled with a hole saw in the centre of a flat surface located at the bottom of the tank, approximately 10 cm above the bottom of the tank. The diameter of the hole should be equal to the diameter of the spigot.
Przygotowanie otworu w zbiorniku.

2) Installing the spigot

Place a gasket on the spigot and then, from the centre of the tank, pass it through the pre-drilled hole. If there are any problems with translation, the spigot can be lightly hammered in with a rubber mallet. Place a second gasket and nut on the spigot protruding from the tank.

Montaż króćca w zbiorniku na wodę pitną

3) Tighten spigot

Tighten the nut all the way, e.g. with a pipe chain spanner. Then clean the tank and the spigot of any shavings that may have occurred during assembly.

Dokręcanie króćca w zbiorniku na wodę pitną

All tanks have the necessary approvals and certificates to allow the tanks to come into contact with foodstuffs.

Oferta na zbiorniki na wodę pitną