Zestaw zbiornik na deszczówkę Big Bounty 1100L Inox
Big Bounty rain barrel 1100
Rainwater tank for the garden
Decorative rainwater tank imitating a wooden barrel with a capacity of 1100 litres. The tank is made of high-density PEHD polyethylene by rotomulding at high temperature with UV protection. The tank is an imitation - a reproduction of old wooden barrels, which perfectly complements the arrangement of gardens and the surroundings of other farm buildings. The tank is equipped with a 3/4" tap and a bottom tap hole. The 3/4 "drain hole must be made individually.
Dimensions
- Height 138 cm
- Diameter 110 cm
Rainwater collector with Inox mesh filter
Collector with Inox mesh filter for rainwater install on rainwater drain pipe
The Filter Collector leads clean water to the rainwater tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled. Filter collector have two positions open or closed. Integrated filter sieve. The mesh is made of stainless steel. Rainwater collector is suitable for the connection of almost all the pipes, circular (diameter 68 mm-100 mm). Collector designed for roof surface max. 70 m2. Available in two different colors brown and gray.
Compared to the previous model, the range of possible gutter diameters has changed. The new model fits gutter diameters from 68 to 100 mm. In the attachments, you will find additional information and installation instructions for the collector.
How it works
1. Rainwater is channelled from the filter entrance to the sieve cartridge.
2. Dirt is rinsed to the sides, and to waste.
3. Cleaned water is led through the cartridge outlet channel to storage.
4. Settings for winter and summer conditions. Twist 180° to remove cartridge filter, no need to demount filter body. The filter cartridge can be cleaned easily with detergent and a brush.
Connection set
The connection tank with rainwater collector
It allows connect tank with the collector of rainwater. 25 cm hose length. Available in two different diameters of 25 mm and 32 mm. 32 mm diameter hose fits most collectors of rainwater. The combination of 25mm fits to the leaves separator with the function of filling, available on request. When ordering, please let us information about a diameter hose.
We recommend that you also take a look at our other offers, such as the Jigsaw Connection Kit.
We recommend that you also take a look at our other offers, such as the Jigsaw Connection Kit.