The Evergreen 475 litre tank is stylised as an old oak trunk. The realistic finish was obtained thanks to a special processing of weather-resistant polyethylene. The large volume of the rainwater tank allows it to be used even in medium-sized gardens. At the front of the tank there is a ¾" threaded hole into which a faucet can be screwed for collecting rainwater. There is a drain on the side that allows the tank to be emptied before winter or to connect several tanks.The lid of the tank is child-proof. Rainwater tanks available in the colour walnut. The tank comes with a 2-year warranty period.
In order to collect rainwater into the Evergreen tank, the tank needs to be fitted with a rainwater collector of the appropriate size (matched to the diameter of the gutter or universal), the collector needs to be connected to the tank and a suitable tap needs to be selected to match the colour scheme of the tank.
Dimensions
Volume [l]
Diameter upper [cm]
Diameter bottom [cm]
Height [cm]
475
70,00
78,00
120,00
Tap with external thread
Dedicated tap to the decorative tanks for rainwater
Tap with 3/4" male thread - Used for decorative rainwater tanks. Available in two versions, chrome or brass. It is characterised by high durability. The material from which it is made has anti-corrosive properties. As a result, it can serve for a long time without damage.
It allows connect tank with the collector of rainwater. 25 cm hose length. Available in two different diameters of 25 mm and 32 mm. 32 mm diameter hose fits most collectors of rainwater. The combination of 25mm fits to the leaves separator with the function of filling, available on request. When ordering, please let us information about a diameter hose.
We recommend that you also take a look at our other offers, such as the Jigsaw Connection Kit.
Rainwater collector with mesh filter for guttering
Rainwater catcher with mesh filter, mounted on the downpipe
Under normal rainfall conditions, the rainwater filter feeds treated water into the rainwater tank with an efficiency of up to 85 - 95 %. Once the tank is full, the filter can act as an overflow outlet. The unit can be set in two positions: open or closed. The integrated filter screen is made of stainless steel. The rainwater collector is suitable for connecting almost all downpipes, round (diameter 68 mm - 100 mm). The rainwater collector is suitable for roof areas of max. 70m2. Available in two different colours, brown and grey.
Compared to the previous model, the range of possible gutter diameters has changed. The new model fits gutter diameters from 68 to 100 mm. In the download area you will find additional information and installation instructions for the collector.
Principle of operation
The rainwater is directed downwards from the filter entrance onto the screen insert. 2.
2. dirt is flushed out to the sides of the cartridge.
3. the purified water flows through the outlet channel from the screen insert to the external rainwater storage tank.
4. settings for winter and summer conditions. To remove the filter cartridge, turn it 180 degrees and pull it out - there is no need to remove the filter body from the drain pipe. The filter cartridge can be easily cleaned with detergent and a brush.
