- Reduced price
NEO MCRAIN DOMESTIC SYSTEM
NEO McRain home system
Hight quality domestic system with rainwater control panel Aquamatic Domestic
Description of action
Rainwater from the roof is collected through the gutter system and then fed drain pipe to the tank. Water is purified on the basket filter with a fine mesh, and then flows into the tank (using gravity). The pump pumps water from the reservoir to the gear (toilet, a washing machine) in the building. If the water level is too low, then automatically is given tap water. The system equipped with a control panel with a self-priming pump and control complement to tap water. The distance between the house and the tank can be up to 12m, otherwise the system AquaMatic Domestic should be used booster pump ( only with Aquamatic Domestic C-Plus).
Scope of Supply
Neo - Benefits for you
Tank sizes of 1500 - 10,000 liters
Minimum foundation depth, significantly smaller earth pit (60% smaller depth and up to 70% smaller pit than with traditional tanks)
Eco-friendly polyethylene - 100% recycling
No seams, connections or welds - 100% waterproof
Low weight, simple installation
Easy backfilling and compacting with sand, gravel or excavated material
The possibility of truck driving (load class SLW 30)
The possibility of foundation in ground water up to the height of the tank flange
35 years warranty - Made in Germany
Cover of the tank - TopCover + Shaft extension VS 60
Cover of the tank designed for pedestrian traffic. Made of polyethylene with double wall, it has protection of children. Shaft extension VS 60 have Height 635mm, Ø 600mm
Maxi filter with extension
Recommended for roof areas up to. to 350m sq. Dimensions: Ø 410mm, height 160mm fine filter (filter mesh size 0.9mm). Filter includes links fasteners and hook
Filter basket with rising (extension) pipe applied to the filter (Dimensions: Ø 350 mm, height 570 mm. The cap can be shortened). The rainwater filter basket is equipped with a convenient handle to pull the basket out. It is ideal for use in gardens, ponds and infiltration systems. The rainwater filter ensures thorough cleaning thanks to a 0.9 mm mesh, therefore also suitable for home systems. It is installed directly in the ground in front of the tank or rainwater seepage system. Advantages are: Narrow construction, simple assembly, small cover. Inlet and outlet DN100, Housing and cover are made of hard PE, There is an option of extension (using a rising pipe), Optional cover enabling circular movement. Recommended for roof surfaces max. up to 350 m²
Wall duct set
Used to seal a technical channel which are cables and hose pump.
Floating intake with filter
Floating intake all the time swim approx. 15-20 cm below the water surface, where it can be pumped purest water from the tank (water surface can float all sorts of impurities). Mesh filter is an additional protection against contamination. Set elements: Float with a diameter of 15cm, Mesh filter (1.2 mm mesh), The check valve 1``, 1`` connector with O-ring in the suction hose Ø36mm, Suction hose Ø 36mm, length 2m.
Rainwater control panel AquaMatic Domestic S-Plus/C-Plus
The device pumps the rainwater from the tank and delivers it to the indoor installation. In the absence of rain water in the tank, the control panel can automatically use tap water. In one device has three main components: pump, control and complete the tap water system. The cabinet should be installed inside the house, eg. in the basement, boiler room or utility room.
Information about parameters of rainwater control panels in the "download" tab.
You might also need
- Large clear display
- Electronic, accurate measurement
- Simple assembly and easy to use
- Overflow siphon for plastic tanks
- Made of polyethylene
- Optionally equipped with protection against rodents
- Made of polyethylene
- Suitable for pipe diameters of DN100 and DN125
- It prevents from water turbulence