- -5%
- -5%
Rainwater collector with filter and valve
- Rainwater collector equipped with a filter and valve
- Collects water from the roof areas up to 50 m2
- Suitable for gutters with a diameter from 68 to 100mm
Lowest price in the period of 30 days before current promotion: PLN3,154.00 +6%
Tank B 1000 l or 2000 l,
Collection set with hose,
decorative tap,
EKJ-802S submersible pump,
Connection kit for the FASTFIT pump.
The tank is available in gray color with a capacity of 1000 l and 2000 l. The big advantage of the tank is its dimensions. In this case, the tank has a small width and height, but is quite long. Thanks to this, it will fit into gardens where space is limited.
Rainwater tank B is made of high-quality polyethylene. It is a plastic resistant to changes in ambient temperature between - 40 °C and +60 °C. However, remember to empty the tank for the winter. Water changes its volume under the influence of temperature and may burst the tank. Polyethylene does not corrode and does not fade under the influence of UV radiation. The tanks are rotationally molded, so they have no welds or joints. This minimizes the risk of leakage.
Set name | Capacity [l] | Height [mm] | Width [mm] | Lenght [mm] | Diameter of the inspection hole [mm] |
Roma B 1000 + | 1000 | 1310 | 670 | 1530 | 350 |
Roma B 2000 + | 2000 | 1440 | 770 | 2350 | 350 |
The set includes a 2 m long transparent hose. It serves as a connection to a rainwater tank with a 3/4" connection and a shut-off valve. Thanks to the attached clip, the hose can be used as a water level indicator in the tank. It is not possible to install a tap in the tank.
Set of fittings and pressure hose. It is used to connect the pump and the tank outlet with a garden hose connector.
The advantage of ground pumps is the mobility of their use. They provide optional use in the case of several tanks. It is possible to move the pump to subsequent tanks. It is not necessary to use several separate pumps for each tank.
Parameter | EKJ-802S |
Qmax [m3/h] | 3,5 |
Max lifting height [m] | 38 |
Suction depth [m] | 7 |
Rated power [W] | 800 |
Pressure line and suction line | 1" GW |
Max. liquid temp [ºC] | 35 |
Dimensions [mm] | 336 x 199 x 198 |
Mass [kg] | 9 |
Level of security | IPX4 |
1. select a DECORATIVE TANK, which matches the colour scheme of your surroundings and has a capacity suitable for you.
2. measure the diameter of the downpipe and select a suitable RAINWATER COLLECTOR .
3. match the diameter of theconnecting hose between the collector and the tank (most collectors have an outlet of 32 mm)
4. match the TANK with the colour of the rainwater tank.
If you wish, you can equip the set with a DRAIN HOSE to empty the tank during winter.