Proszę potwierdzić zamówienie - koszty dostawy zostaną przesłane mailem jako oddzielna informacja. Proszę o chwilę cierpliwości.
individual valuation
Kurier ( przelew na konto)
Czas dostawy od 2-4 dni
PLN264.45
In Stock
Pack description
The promotional kit consists of a Bolt septic tank with a capacity of 1,000 to 3,500 litres and a Box distribution well. The offer is limited in time until 15 April 2023.
The septic tank is connected to the sewage system of domestic sewage and planted in the ground outside the building, in a previously prepared trench. The septic tank is buried in the ground and its only visible element on the surface of the earth is the cover installed on the inspection hatch. The Marseplast septic tank Bolt is made of linear polyethylene using rotational molding, which guarantees its durability, strength, resistance to sewage and corrosive soil effects. However, it should be remembered that the septic tank should be properly seated and certain stages of its assembly must be carried out in the correct order. The septic tank is a tight flow tank designed for installation in the ground and part of a household sewage treatment plant.
We also recommend other models of septic tanks from our offer, such as the EKO Septic Tank.
The tank consists of:
Filter basket
Septic tank
Advantages of the Bolt tank:
The tank can be installed in difficult terrain:
It can be placed at a depth of 70 cm, if it is necessary to increase the mounting depth of the tank, it should be mounted above the settler plate of reinforced concrete.
Tank name
Length [mm]
Width [mm]
Height [mm]
Inflow height [mm]
Drain height [mm]
Inlet diameter [mm]
Outflow diameter [mm]
Mass [kg]
BOLT 1000
2020
780
1000
830
800
110
110
45
BOLT 2500
2220
1240
1480
1270
1215
160
110
92
BOLT 3500
2990
1240
1480
1270
1215
160
110
122
*dimensional tolerance +/- 3%
The manufacturer of BOLT septic tanks certifies that the septic tanks are manufactured in accordance with the standard:
PN-EN 12566 - 1:2004
PN-EN 12566 - 1:2004/A1:2006
More information on the Bolt septic tank can be found in the user's book under the attachments.
Separation well Box
Marseplast separation well. It is part of the treated sewage or rainwater infiltration installation. It is compatible with home sewage treatment plants. It is used to connect the reservoir with drainage (pipes). The well has one inflow and three outflow holes. This allows you to connect up to three absorption wells or other drainage receivers. It has a large active capacity, which is prepared for a sudden discharge of sewage or rainwater.
The separation well Box has a cover. Cover is screwed on. Thanks to this, it is protected against unauthorized access. The hatch also allows regular cleaning. This ensures correct functioning of the device. It was made of plastic - polyethylene. This material is highly resistant to chemicals and damage. It can work in both low and high ambient temperatures.
The separation well Box is compatible with the SR 20 and 40 level raiser. They allow for deeper foundation of the separating well.
