CHO drinking water tanks
  • CHO drinking water tanks
  • CHO drinking water tanks

CHO drinking water tank

PLN1,018.44 tax incl
PLN828.00 tax excl
A580051
Capacity:
Termin dostawy od 7 do 14 dni
Ask about the product
  • Polyethylene tanks for food liquids
  • Capacity from 300 to 5000 l
  • 20-year warranty

CHO tank

Above ground tanks for drinking water/rainwater

The above-ground polyethylene CB tanks are designed for the storage of foodstuffs, drinking water and rainwater (exactly like the CP tanks, CV tanks or CB tanks). The tanks are resistant to the effects of sunlight and can be installed in an uncovered area. Can be used at temperatures from -50 °C to +60 °C. Proper installation of the drinking water tanks in accordance with the manufacturer's recommendations guarantees protection against the growth of algae. Several chemical substances such as acids, alkalis, alcohols, etc. can be stored in the tanks (see resistance table for details).

The aboveground water tanks have a declaration of conformity with EC directive No. 10/2011 DT, 14/01/2011, 1935/2004 DT, 27/10/2004 and certified by the Polish National Institute of Hygiene.

Dimensions

Capacity [l]
Diameter [mm]
Lenght [mm]
Height [mm]
Connections
300
625
1100
705
2 x 1`` + 1 x 3/4``
500
720
1500
800
2 x 1`` + 1 x 3/4``
750
820
1580
900
2 x 1 ¼`` + 1 x 3/4``
1 000
915
1720
995
2 x 1 ¼`` + 1 x 3/4``
1 500
1155
1630
1255
2 x 1 ½`` + 1 x 3/4``
2 000
1300
1700
1400
2 x 1 ½`` + 1 x 3/4``
3 000
1450
2000
1550
2 x 1 ½`` + 1 x 3/4``
5 000
1740
2310
1840
2 x 2`` + 1 x 3/4``

Specific References

ean13
8019742007873

DRINKING WATER TANKS - INSTALLATION OF CONNECTIONS

Drinking water tanks are manufactured using rotomoulding technology, which allows the tanks to be produced as a whole, without the need to weld individual components together, which has a beneficial effect on the mechanical strength of the tank. Polyethylene tanks are lighter than their steel or resin counterparts. Tanks made of non-toxic polyethylene are ideal for storing foodstuffs as well as technical substances used in various production processes. The polyethylene material prevents the growth of algae by being impermeable to sunlight. The tank can withstand temperatures from -20 to +80 °C.

The proposed tanks are ideal for:

-storing drinking water or other food-grade liquids both indoors and outdoors,

-the construction of buffer tanks to be used in the event of pressure drops or water shortages,

-to store water for fire-fighting purposes, laundry or dishwashing,

-supplying water in the event of a shortage of water on distribution vehicles,

-collecting and using rainwater, which can be used for irrigation or toilet flushing, etc.

Installation of spigots

The polyethylene tanks have a polypropylene lid equipped with a vent with anti-fungal protection and threaded connections. Additional inlet and outlet openings can be provided on request. Here is how to properly assemble the spigots.

1) Preparation of the hole

The hole for the spigot should be drilled with a hole saw in the centre of a flat surface located at the bottom of the tank, approximately 10 cm above the bottom of the tank. The diameter of the hole should be equal to the diameter of the spigot.
Przygotowanie otworu w zbiorniku.

2) Installing the spigot

Place a gasket on the spigot and then, from the centre of the tank, pass it through the pre-drilled hole. If there are any problems with translation, the spigot can be lightly hammered in with a rubber mallet. Place a second gasket and nut on the spigot protruding from the tank.

Montaż króćca w zbiorniku na wodę pitną

3) Tighten spigot

Tighten the nut all the way, e.g. with a pipe chain spanner. Then clean the tank and the spigot of any shavings that may have occurred during assembly.

Dokręcanie króćca w zbiorniku na wodę pitną

All tanks have the necessary approvals and certificates to allow the tanks to come into contact with foodstuffs.

Oferta na zbiorniki na wodę pitną