Gama Rain Jet garden system
A complete rainwater tank with filter and pump for using rainwater in the garden for watering
A description of the action
Rainwater is collected from the roof through the gutter system and then fed through the drain pipe to the tank. The water is purified on the filter in front of the tank with fine mesh, after which it flows into the tank (by gravity). The water distribution system thanks to the Multidiver pump allows watering the garden using a garden hose.
Delivery range :
Gama Rain tank:
Tank sizes of 1000 or 1500 liters
High-quality polyethylene, no seams, joints or welds - 100% waterproof
Low weight, simple installation, durable, durable and resistant to loads
10 years warranty - Made in Poland
Riser pipe extension 30
Height 300 mm, Ø 600 mm, polyethylene, shortening or optional 50 cm module possible.
Rain Drop filter - rainwater filter
The rainwater filter is designed for catchment areas not exceeding 500 m2. The filter has a protection in the filter cover that prevents access by third parties and children while playing in the garden. The filter can be retrofitted with SR-20 or SR-40 extensions 20 or 40 cm high so that the filter can be installed deeper in the ground.
Garden Box for connecting a garden hose
The kit includes a zawór GZ ball valve and a PE ¾ "GZ elbow screwed into the ball valve from below and 32 mm on the other side of the elbow. Upper diameter of the box - 210 mm, lower diameter of the box - 180 mm, height of the box - 120 mm.
Delivery hose 1 1/2 "10 m for connecting the pump with a garden box
Plastic hose - dimension: 1 1/2 "10 m, operating temperature - + 5 ° C ÷ + 30ºC, maximum working pressure - 4 atm.
Multi Diver Auto 1200 pump |
Multi Diver 1200 Auto is an electronically controlled submersible pump. It is recommended to draw fresh, cold, clean water from vertebral wells, large tanks, as well as from drilled deep water intakes with a sufficient diameter (suggested pipe diameter 200mm). The pump is equipped with a water jacket, which forces the engine to cool by the pumped water. MULTI DIVER 1200 AUTO operation control is carried out automatically, by means of an electronic device controlling the pump operation, by monitoring the pressure increases and decreases in the installation. When the water intake starts, the system pressure drops and the control device switches the pump on. On the other hand, when the water consumption stops (the tap is turned off), when the pressure in the installation increases, the built-in flow sensor turns off the pump. When the pump is not running, the built-in check valve maintains pressure in the discharge pipe. The pump is also equipped with an automatic dry running protection system. The range of hydraulic parameters of the pump and ease of installation allows it to be used for water supply of single-family houses, summer houses, for watering gardens and not very large agricultural areas. |
Pump technical data:
Parameter | Value |
Max. performance | 101 l/min |
Tension | 230 V |
Max. current | 4,67 A |
Max. the high of raising | 45 m |
Engine power | 1,2 kW |
Cable lenght | 10 m |
Pressure connection | 1 1/2" |
Weight | 9,8 kg |
Sprawdza mi się idealnie, ale teraz kupił bym ten większy!
teraz wiem że większy model byłby idealny.