• -5%

Verona rainwater tank set with pump

4,098.00 PLN 5%
3,893.10 PLN tax incl
3,165.12 PLN tax excl

Lowest price in the period of 30 days before current promotion: 3,836.10 PLN +1%

The lowest price of the product 3,836.10 PLN in day 27.03.2024

Capacity:
Color:
Pump:
Kolor zbieracza:
In Stock
Ask about the product
  • Gray tank
  • Three pumps to choose from
  • Tank with a capacity of 500l or 1000l

Aboveground rainwater tank with a pump


Above-ground tank with pump and accessories. The set includes:

The composition of the set:

  • Verona reservoir
  • Collection kit with hose
  • Pump options: GAP X80, EKJ-802S or Pedrollo Top Multi Tech 2
  • Connection kit for the pump
  • Rainwater collector with filter
  • Connection kit 32 mm

Verona reservoir

These decorative rainwater tanks withstand external temperature changes from - 20 ° C to + 80 ° C, and the materials used ensure maximum resistance to corrosion and oxidation. The monoblock structure guarantees strength and solidity as there are no welds that could weaken parts under stress by internal stresses. For the purposes of installation, holes can be drilled in the tanks in the designated areas. The smooth surfaces of the tanks allow easy maintenance, light weight, easy transport and installation. In addition, the cost is much lower than that of metal, cement and fiberglass. 

Dimensions

Name
Capacity [l]
Length [cm]
Width [cm]
Height [cm]
Inspection hatch [cm]
Inlet
Outlet
Drain hole
Verona 1000
1000
139
80
115
21
-
1”
¾”

Tolerance: +/-3% on dimensions; 5% on capacity

Collection kit with hose

2 m long transparent hose as a connection to the rainwater tank with a 3/4" connection and shut-off valve. Thanks to the attached clip, the hose can be used as an indicator of the water level in the tank

Connection kit

It enables the connection of the tank with a rainwater collector. Hose length 25 cm, diameter 32 mm.

Collector with INOX mesh filter

Under normal rainfall conditions, the rainwater filter supplies the purified water to the rainwater tank with an efficiency of 85 - 95%. After filling the tank, the filter can act as an overflow drain. The device can be set in two positions: open or closed. The integrated filter sieve is made of stainless steel. The rainwater collector is suitable for connecting almost all downpipes, round (diameter 68 mm - 110 mm). The collector is designed for roofs with an area of ​​max. 70 m2. Available in two different colors brown and gray.

Pedrollo TOP Multi Tech II pump

TOP MULTI-TECH pumps are recommended for pumping clean water and liquids that are not aggressive to the pump materials. Due to their high efficiency and reliability, the pumps are used in supplying tanks with drinking water and wells, for drawing rainwater from cisterns for water gardens or for use in irrigation systems, etc. A switch inside the pump starts or stops the pump automatically when a tap is opened or closed . The pump comes with a set of fittings and a pressure hose to connect the pump and the outlet from the tank ended with a connector for connecting a garden hose.

Model
Power supply
Capacity
Spigot diameter 
phase
[kW]
[HP]
Q [l/min]
H [m]
Discharge
TOP MULTI-TECH 2
1
0,55
0,75
10÷80
40÷5
1 ¼”

GAP X80 pump

The Gap X80 pump is an automatic submersible pressure pump. It is used for irrigating small green areas. The pump is running in start / stop mode. After opening the receiver (e.g. a tap with garden water), it starts, and after closing it, it goes into standby mode. The pump comes with a set of fittings and a pressure hose to connect the pump and the outlet from the tank ended with a connector for connecting a garden hose.

Max. flow rate
83 l/min
Max. lifting height
20 m
Max. operating pressure
2 bars
Discharge line
3/4'' male thread
Length of power cable
10 m
Max. immersion depth of the pump
7 m
Power
0,55 kW
Max. pumped water temperature
35° C
Voltage
230 V
Frequency
50 Hz
Protection class
IPX8
Impellers
plastic
Shaft
stainless steel
Housing
plastic

Leo EKJ-802S pump

Designed for the distribution of clean water from above-ground rainwater tanks. Ideal for domestic use in conjunction with small tanks. The pump is used for watering the garden, greenhouses and supplying water from wells. In addition, it can be used on poultry farms and fish farms. The pump comes with a Fastfit kit - fittings and pressure hose for connection.

Model
Power
Capacity
Spigot diameter
[kW]
[HP]
Q [l/min]
H [m]
Discharge
EKJ-802S
0,80
1,09
58
38
1 ”
Grade
star star star star star
2022-07-01

Ergonomiczny zbiornik

Dużym atutem jest to, że zbiornik jest wąski, więc zajmuje mało miejsca na mojej działce! Zestaw działa super bez problemów!