• -5%
  • Rainwater tank set Rimini with GAPX80 pump
  • Rainwater tank set Rimini with GAPX80 pump

Rainwater tank set Rimini with pump

4,916.00 PLN 5%
4,670.20 PLN tax incl
3,796.91 PLN tax excl

Lowest price in the period of 30 days before current promotion: 4,567.60 PLN +2%

The lowest price of the product 4,567.60 PLN in day 27.03.2024

Capacity:
Color:
Pump:
Kolor zbieracza:
In Stock
Ask about the product
  • Tank in granite and green
  • Choice of three pumps
  • Tank with 1000l or 2000l capacity

Ground rainwater tank with a pump

Above-ground tank including pump and accessories. The kit includes:

  • Rimini reservoir
  • Collection kit with hose
  • Pump options: GAP X80, Pedrollo Top Multi Tech 2 or PKm60
  • Connection kit for the pump fastfit
  • Rainwater collector with filter
  • Connection kit 32 mm
Tank connection diagrams are available in the attachments. 

Rimini tank

Rimini are decorative tanks for rainwater and drinking water. They are suitable for ambient temperatures between - 20 ° C and 80 ° C. The materials provide maximum resistance to corrosion and oxidation. The monoblock structure is characterised by the absence of welds. As a result, no stresses arise that would weaken the structure. For installation purposes, holes can be drilled into the tank at special points. The smooth walls of the tanks allow for easy maintenance. They are lightweight, which makes them easy to transport and install. This makes their cost much lower than metal, cement or fibreglass.
We have other sets in the same series, namely the Grande set and the Verona set.

Dimensions

Name
Capacity [l]
Length [cm]
Width [cm]
Height [cm]
Inspection hatch [cm]
Inlet
Outlet
Drain hole
Rimini 1000
1000
150
68
145
30
1"
1”
¾”
Rimini 2000
2000
233
68
190
30
1"
1”
¾”

Tolerance: +/-3% on dimensions; 5% on volume

Collection kit with hose

2 m long transparent hose as a connection to the rainwater tank with a 3 / 4`` connection and shut-off valve. Thanks to the attached clip, the hose can be used as an indicator of the water level in the tank. There is no possibility of fitting a tap in the tank.

Connection kit

It enables the connection of the tank with a rainwater collector. Hose length 25 cm, diameter 32 mm.

Fastfit connection set

A set of fittings and pressure hose to connect the pump and tank outlet terminating in a garden hose coupling.

Collector with INOX mesh filter

Under normal rainfall conditions, the rainwater filter supplies the purified water to the rainwater tank with an efficiency of 85 - 95%. After filling the tank, the filter can act as an overflow drain. The device can be set in two positions: open or closed. The integrated filter sieve is made of stainless steel. The rainwater collector is suitable for connecting almost all downpipes, round (diameter 68 mm - 110 mm). The collector is designed for roofs with an area of ​​max. 70 m2. Available in two different colors brown and gray.

Pedrollo TOP Multi Tech II pump

TOP MULTI-TECH pumps are recommended for pumping clean water and liquids that are not aggressive to the pump materials. Due to their high efficiency and reliability, the pumps are used in supplying tanks with drinking water and wells, for drawing rainwater from cisterns for water gardens or for use in irrigation systems, etc. A switch inside the pump starts or stops the pump automatically when a tap is opened or closed . The pump comes with a set of fittings and a pressure hose to connect the pump and the outlet from the tank ended with a connector for connecting a garden hose.

Model
Power supply
Capacity
Spigot diameter
phase
[kW]
[HP]
Q [l/min]
H [m]
Discharge 
TOP MULTI-TECH 2
1
0,55
0,75
10÷80
40÷5
1 ¼”

GAP X80 pump

The Gap X80 pump is an automatic submersible pressure pump. It is used for irrigating small green areas. The pump is running in start / stop mode. After opening the receiver (e.g. a tap with garden water), it starts, and after closing it, it goes into standby mode. The pump comes with a set of fittings and a pressure hose to connect the pump and the outlet from the tank ended with a connector for connecting a garden hose.

Maximum flow rate
83 l/min
Maximum lift height
20 m
Maximum operating pressure
2 bar
Discharge line
3/4'' GZ
Length of power supply cable
10 m
Maximum immersion depth of the pump
7 m
Rated power
0,55 kW
Maximum pumped water temperature
35° C
Voltage
230 V
Frequency
50 Hz
Protection class
IPX8
Rotors
ptastic
Shaft
stainless steel
Housing
plastic

Leo EKJ-802S pump

Designed for the distribution of clean water from above-ground rainwater tanks. Ideal for domestic use in conjunction with small tanks. The pump is used for watering the garden, greenhouses and supplying water from wells. In addition, it can be used on poultry farms and fish farms. The pump comes with a Fastfit kit - fittings and pressure hose for connection.

Model
Power
Capacity
Spigot diameter
[kW]
[HP]
Q [l/min]
H [m]
Discharge
EKJ-802S
0,80
1,09
58
38
1 ”
Grade
star star star star star
2023-07-27

Dotacja

Kupiłem zestaw z pompą Top i się nie zawiodłem. Działa bardzo sprawnie. Polecam, bo też wygląda naprawdę ładnie

Grade
star star star star star
2022-07-01

Super zestaw

System działa wydajnie i dobrze wygląda obok domu. Pompa nie hałasuje bardzo. Zestaw bardzo mi odpowiada