EcoLeader Z Rain rainwater harvesting system
Complete rainwater harvesting tank kit with pump, water intake cover and basket filter for the use of rainwater in the garden
Functional description
Rainwater is collected from the roof via a gutter system and then fed through a drain pipe into the tank. The water is cleaned on a fine mesh basket filter, which is mounted under the cover.
The rainwater then flows into the tank (by gravity).
The system for using rainwater in the garden with the Multi IP1000 Auto or Lift 45 pump allows the garden to be watered using a garden hose directly from the innovative water intake cover.
Scope of delivery:
- Capacity 1000 litres
- High-quality polyethylene, no seams, connections or welds - fully leak-proof
- Low weight (35 kg), very easy to install
- Permissible foundation depth is 0.5 m from ground surface to top edge of tank
Technical specifications:
Capacity [l]
| Tank height[mm]
| Wall thickness [mm]
| Width [mm]
| Length [mm]
| Manhole diameter [mm]
| Weight [kg]
|
1000
| 1350
| 6,5
| 1152
| 1152
| 605
| 35
|
Cover DN650 with integrated rainwater harvesting
The cover includes an additional box with a ¾ GZ ball valve for connection to the garden hose. The water intake in the cover allows convenient watering of the garden directly from the tank. Also included with the lid is:
- ¾"-1" GZ PE elbow screwed in from the bottom of the cover,
- 1.8 m long 1" discharge hose to connect the cover to the pump - operating temperature from +5 °C to +30 ºC, maximum operating pressure - 5 atm,
- metal clamp.
Diameter of the water intake cover: 210 mm.
Advice on superstructure
It is possible to extend the tank flange. For this purpose,
a DN640 universal extension from the same manufacturer should be used. The superstructure has a slightly larger diameter than the tank manhole (the tank flange is completely retracted in the superstructure). Therefore, the manufacturer instructs that the superstructure should be fixed to the flange with screws and the joint sealed with silicone. The maximum possible ground pressure of the tank should also be taken into account when planning the excavation.
If this superstructure is used, it is also necessary to plan where the tank inlets are to be located. Please contact us.
Compatible with the DN640 superstructure is the DN690 cover, which we also retrofit with an integrated water intake. Please contact us for this. Dedicated fine-mesh basket filter
The rainwater is cleaned on a basket filter before it flows into the tank. The basket filter is mounted under the cover, directly in front of the inlet opening. This ensures that solid impurities that are hazardous to the pump are immediately caught. Cleaning and changing the filter is very easy and intuitive. The filter is accessible by opening the cover.
Submersible pump
Highly efficient submersible, pressure pump. Ideally suited for garden irrigation or sanitary purposes. The integrated pressure switch with flow sensor automatically switches the pump on/off as required. The integrated dry-running protection protects the pump from damage by stopping operation if the water level is too low. The pump is equipped with a carrying handle and power cable. Adapted for use with a flexible hose.
Depending on availability, the kit is supplied with a Multi IP 1000 Auto pump, a Lift 35 Auto pump or a 45 Auto pump.
Pump model
| Qmax
Capacity
[l/min]
| Hmax
Head
[m]
| P
Motor power
[kW]
| U Voltage
[V]
| Discharge outlet
[Inch]
| H
Pump height
[mm]
| A
Pump diameter
[mm].
| Cable length
[m]
|
Multi IP 1000 Auto
| 100
| 40
| 1,00
| 230
| 1 1/2"
| 530
| 170
| 10
|
Lift 45 Auto
| 100
| 40
| 1,00
| 230
| 1"
| 535
| 145
| 10
|
Lift 35 Auto
| 100
| 35
| 0,80
| 230
| 1"
| 480
| 145
| 10
|
NOTE: When ordered, the set is delivered in 2 parts.
