Rainwater harvesting system Water Rain Drop 2000 l - 5000 l
Description of operation:
Rainwater is collected from the roof via a gutter system and then fed through a drain pipe into a tank. The rainwater is cleaned on a fine mesh pre-tank filter and then flows into the tank (by gravity). The water distribution system, thanks to the pump, allows the garden to be watered using a garden hose.
Tank sizes of 2000 to 5000 litres,
High-quality polyethylene,
No seams, joints or welds - 100% watertight,
Low weight, easy assembly,
Robust, durable and resistant to loads,
Easy to install, soil compaction with sand and cement,
5-year warranty.
Tank dimensions
Volume [l] | Height [mm] | Width [mm] | Length [mm] | Weight [kg] |
2 000 | 1 570 | 870 | 2 410 | 89 |
3 000 | 1 570 | 1 210 | 2 700 | 107 |
4 000 | 1 860 | 1 500 | 2 400 | 159 |
5 000 | 2 200 | 1 500 | 2 400 | 203 |
The tank can be matched with:
Rain Drop filter
The rainwater filter is designed for catchment areas not exceeding 500m2. The filter has a protection in the cover that prevents access by third parties and children while playing in the garden. The filter can be retrofitted with SR-20 or SR-40 extensions 20 or 40 cm high so that the filter can be installed deeper in the ground.
Water intake:
Two types of water intake can be selected:
External intake - garden box with cylinder-shaped intake made of durable plastic (PP) with increased UV resistance. Equipped with built-in steel ball valve - butterfly valve with 3/4" male thread under the box cover and elbow with 40 mm plastic pipe outlet on the underside of the box. A hinged, snap-on manhole cover prevents dirt from entering the box. In addition, the box lid has a special opening that allows the lid to be closed while a garden hose is connected. Dimensions: Height: 13.5 cm, Base diameter: 17.6 cm, Lid diameter: 19.2 cm, Lid thickness: 1.0 cm.
The second option is a water intake directly mounted in a special lid. This contains an additional inspection hole for the intake. The hose is terminated with an Aqua Stop quick-release coupling. This system works so that if the hose is unhooked, the water supply is disconnected automatically.
Pressure hose 3.2 m - 1 "inch
3.2 m pressure hose used to connect the pump to the water intake - withstanding up to 5 atmospheres for the garden box.
When integrated into the intake cover, the hose is 3 m long. It is terminated with a quick coupling and threaded connection.
Submersible automatic pump
Submersible pump Multi IP 1000 Auto | Submersible pump Lift 45 Auto | Submersible pump Lift 35 Auto |
Very powerful submersible, pressure pump. Ideally suited for garden irrigation or sanitary purposes. Integrated pressure switch with flow sensor automatically switches the pump on/off as required. The integrated "dry run" protection protects the pump from damage by stopping operation if the water level is too low. The pump is equipped with a carrying handle and power cable. Adapted for use with a flexible hose.
| Automatic submersible pump that requires no additional accessories. Integrated pressure switch with flow sensor automatically switches the pump on/off as required. The integrated dry-running protection protects the pump from damage by stopping operation if the water level is too low. The pump is equipped with a convenient carrying handle and power cable. Adapted for use with a flexible discharge hose. |
Depending on availability, the set is supplied with either the Multi IP 1000 Auto pump, the Lift 45 Auto pump or the Lift 35 Auto pump. All these pumps are of high quality and are successful substitutes.
Pump specifications:
Name | Multi IP Auto 1000 | Lift 45 Auto | Lift 35 Auto |
Max. flow [l/min] | 100 | 100 | 100 |
Voltage [V] | 230 | 230 | 230 |
Max. lifting height [m] | 40 | 40 | 35 |
Motor power [kW] | 1,0 | 1,0 | 0,8 |
Discharge nozzle [inch]. | 1 1/2 | 1 | 1 |
NOTE: When ordered, the set is delivered in 2-3 parts.
Wszystko w porzadku
Jak najbardziej polecam. Nic się złego nie dzieje, działa. Otrzymałem wszystko na czas i kompletne.